Tracks Series
MACH 4 - Fantastic tracked tractor with 4 rubber tracks: A formidable articulated tracked tractor with four rubber tracks and a 74.2 hp Kubota engine. The flagship of the R Series for its outstanding performance and imposing appearance. Designed for use in extreme conditions where other tractors cannot operate: steep gradients (including side slopes) and tough terrain. On mud, snow, loose earth, and even rain-soaked ground, the Mach 4 tracked tractor works with minimum ground compaction. Whatever the weather, you can keep on working, even in conditions that would halt a conventional wheeled tractor. The rubber tracks allow the tractor to ""float"" over the ground while affording increased stability and better grip, ensuring plenty of traction at all times for greater operating efficiency and productivity. Equipped with reverse drive, it is extremely manoeuvrable even in confined spaces, capable of making tight turns without digging in. With Mach 4, you avoid the pivot turns typical of conventional crawlers which damage the ground when executing headland maneuvers. A crawler that offers a level of comfort equal to a conventional tractor, with a spacious cab, plenty of legroom, a supremely comfortable driving position, and, on request, a super-ergonomic joystick (the proportional multifunction JCM™) that significantly simplifies the operation of all implements. It can be equipped with the latest generation Air pressurised cab, also available in a Category 4 certified version offering total protection against harmful dust, gas and vapors. Unlike a conventional crawler, the Mach 4 tracked tractor does not have to be transported on another vehicle from one work site to another as it is homologated for use on the road at speeds up to 40 km/h.
MACH 2 R - Steering 2-track tractor with reverse drive: With a 98 hp Kubota engine, this two-track tractor with rubber rear tracks and 20" front wheels, steering and reverse drive, is designed for operators looking for increased grip, traction and stability in a tractor that is easy and safe to drive. The innovative track/wheel configuration allows the tractor to move with agility on slopes, including steep gradients and side slopes, while maintaining constant grip and traction, performing complex maneuvers that would be difficult to achieve with a normal wheeled tractor. Thanks to the rear tracks, you can work on rough, muddy and slippery terrain, with minimum ground compaction even on rain-soaked ground. Whatever the weather, you can keep on working, even in conditions that would halt a conventional wheeled tractor. The integrated PTO/lift/hydraulic system is suitable for use with a wide range of front and rear implements. The on-board comfort is equal to a conventional tractor, with a spacious operator cab, plenty of legroom, and a supremely comfortable driving position with an optional ergonomic JCM joystick (proportional multifunction control), that significantly simplifies work with all implements. The Mach 2 track tractor can be equipped with the latest generation Air pressurised cab, also available in a Category 4 certified version offering total protection against harmful dust, gas and vapours. It is homologated for use on the road at speeds up to 35 km/h and therefore does not need to be transported on another vehicle between work sites.
MACH 4 TONY: MACH 4 TONY is a quadtrack with an articulated ACTIO™ chassis, reversible drive and an electronically controlled constant variable transmission with 4 speed ranges along with 3 acceleration modes for each range and 3 for each range in Automotive mode. The unique transmission, combined with the Rev-Guide System™, increase the vehicle’s versatility, offering it maximum operative efficiency with the possibility of being fitted with numerous pieces of specific equipment and therefore simplifying work procedures in tight spaces, on uneven ground and on steep slopes. The articulated chassis and the narrow track render the MACH 4 TONY model especially agile whilst moving between rowed crops and when carrying out maneuvers thanks to its wide steering angle.
MACH 2 R - Steering 2-track tractor with reverse drive: With a 98 hp Kubota engine, this two-track tractor with rubber rear tracks and 20" front wheels, steering and reverse drive, is designed for operators looking for increased grip, traction and stability in a tractor that is easy and safe to drive. The innovative track/wheel configuration allows the tractor to move with agility on slopes, including steep gradients and side slopes, while maintaining constant grip and traction, performing complex maneuvers that would be difficult to achieve with a normal wheeled tractor. Thanks to the rear tracks, you can work on rough, muddy and slippery terrain, with minimum ground compaction even on rain-soaked ground. Whatever the weather, you can keep on working, even in conditions that would halt a conventional wheeled tractor. The integrated PTO/lift/hydraulic system is suitable for use with a wide range of front and rear implements. The on-board comfort is equal to a conventional tractor, with a spacious operator cab, plenty of legroom, and a supremely comfortable driving position with an optional ergonomic JCM joystick (proportional multifunction control), that significantly simplifies work with all implements. The Mach 2 track tractor can be equipped with the latest generation Air pressurised cab, also available in a Category 4 certified version offering total protection against harmful dust, gas and vapours. It is homologated for use on the road at speeds up to 35 km/h and therefore does not need to be transported on another vehicle between work sites.
MACH 4 TONY: MACH 4 TONY is a quadtrack with an articulated ACTIO™ chassis, reversible drive and an electronically controlled constant variable transmission with 4 speed ranges along with 3 acceleration modes for each range and 3 for each range in Automotive mode. The unique transmission, combined with the Rev-Guide System™, increase the vehicle’s versatility, offering it maximum operative efficiency with the possibility of being fitted with numerous pieces of specific equipment and therefore simplifying work procedures in tight spaces, on uneven ground and on steep slopes. The articulated chassis and the narrow track render the MACH 4 TONY model especially agile whilst moving between rowed crops and when carrying out maneuvers thanks to its wide steering angle.
